Anonymail Pro - The ultimate anonymous mailer
 
Anonymail Pro - Total anonymous mailer  

Home       Free Download       Prices       FAQ       Manual       Factors       Webmail       Terms of use       Contact

 

Step by step direction how to run Anonymail Pro

“Anonymail Pro” has 5 tabs and it is very simple to run it, BUT you have to run it correct as the instructions below to avoid problems and unnecessary questions.


The first tab is the “Email Files” tab there you have to load the list or lists you want to send them emails.

You can load unlimited number of lists with unlimited number of emails, BUT you have to load the list or lists ONLY from the program folder, and its mean – you have to copy and paste the lists into the program folder.

When you load list or lists, the program doesn't load it to the PC memory or any other place, so you don't need to wait even one second after you load the list(s) and you can start to send emails.

As you can see, you have the option to remove any list you already load, or to load new list any time even when the program runs.

The lists must be as the sample list you get with the program when you install it, address under address.

(take a look inside the sample list “maillist.txt”).

You MUST load at least one email list even you intend to send only “Test” email and don’t intend to send to the list.

 

--------------------------------------------------------

 

The second tab is the “Configuration” tab.

In this tab you have three options:

“Emails Per Session” - The first option is “Emails Per Session” – here you can choose how many emails per session the program will send in each session (up to 100 usually and up to 1000 in special programs).

The program sends emails session after session automatically, every session contains the number of emails the program sends at the same time in a session and it means: if you choose for example the number 50, the program will send 50 emails to 50 different recipients every session BUT it will use ONLY ONE BODY to all the 50 emails, so if your message body is 3K for example, even the program sends 50 or any other number of emails at the same time in the same session, it will use only 3K of your bandwidth, so you can send even 100 emails in one session with Dial Up connection without any problem.

By default the program start with 10 emails per session so you have to change it to any other number as you want EVEN when the program runs and sends emails.

We suggest you not to use the option to send 100 emails per session all time because many Mail Servers reject sessions with many emails.

To AOL for example, you can send up to 5 emails per session and if you send over this number, AOL rejects all the session.

To Yahoo we suggest you to send maximum 5 – 10 emails per session because Yahoo rejects any session if it contains 3 or more non valid addresses.

If you send to real mixed list, you can send 100 emails per session without any problem.

If you don’t know how many emails some Domain accept in one session ask us or send 10 emails per session because it is better to send less emails but to hit the targets instead to send much more emails but to miss the targets because the targets Mail Servers will reject the session with too many emails.

“Add random text to subject” – If you use this option, the program puts random text at the end of the subject (or the subjects).

Every session the program will put different random text to the subject and as you already know, the program changes the subject every session if you put more than one subject in the “Subject” tab.

The random text the program puts in the subject of the emails you send, is to make it hard and more difficult to filter the emails you send, because many Mail Servers use filters that try to find some word or words in the subject and the message body against spam, and when the subject as well the message is with new random text every session, it is much harder to filter it.

“Add random text to message body” – This option is very important to use !!! When you use this option, the program puts 4 random lines under your message body but far away from it, and those 4 lines are different every session the program sends emails.

In 99% of the cases, Mail Servers who use filters against spam, use “robots” to find some word or words on the last one or two lines in the message body, and when they find many times the same word or words, they filter the message and actually reject the emails.

Because the program puts 4 random lines at the bottom of the message body you send, and those 4 lines are different every session and every email, the spam filters cannot recognize it is spam and actually the same email again and again to different recipients, so it is almost impossible to filter and rejects the emails you send.

Ignore the “Send Mail Program” field and don’t change nothing inside it. This field is for special program who send special codes like BASE64 encoded etc.

 

----------------------------------------------------------

 

The third tab is the “Message” tab.

In this tab you have three options:

To copy and paste your message, to load your message from any text or HTML file, and to view your message how it looks like and how it will be looks in the recipient mail box when he-she will get it.

After you have some message in the window of this tab, we suggest you to click on the “View In Browser” button, then your browser will open automatically and you will see your message as it will be in any mail box like Outlook or similar, as well in any Webmail box like Hotmail, Yahoo, AOL etc.

The program support by default HTML codes so if you want to send “Text” message, it must be in HTML format and it means – you have to put the sign <br> at the end of every line and if you want to put spaces between the lines, you have to put the sign <p> after the <br> sign or to put more than one <br> sign one after one like: <br><br><br> (it means – new line + 2 empty lines under it).

When you send “Text” email in HTML format you can use many more options than you can use with clear text format, like: colors, different fonts, different fonts size and many more options, even your email will looks like “Text” email.

When you close the program and start it again, the last message you put, will load with the program as it was before you close it.

 

-------------------------------------------------------------

 

The fourth tab is the “Subject” tab.

In this tab you put the Subjects or the Subjects you want to be shown in the emails you send.

You can type any Subject on the “Add Subject” window and click on the “Add” button.

You can put unlimited Subjects and the program rotate and change them every session one after one from the first one to the last one, then it start from the first one again.

If you want to remove some Subject or Subjects you already have, just click on the line you want, then click on the “Remove” button.

The program save automatically the Subject or Subjects you put on it, and even you close the program and start it again, the program will load the Subjects you already put, so you don’t need to type it again and again.

 

------------------------------------------------

 

The fifth tab is the “Process Status” tab.

From this tab you send your emails (the Test emails as well the emails from lists), and you also see in real time all the process between the program and the system, session after session.

You have very important option to send “Test emails”. This option lets you to send only one email at a time to one of your mail boxes to see and check the emails you plan to send to the list or the lists you load in the “Emails Files” tab (the first one).

Never send emails from lists(s) without check it before by the Test option and even send Test email from time to time as you will read the instruction below.

You can send unlimited Test emails to the same email address, something you cannot do from a list, because the program sends only one email to the same recipients in the list or the lists you load.

Just type the email address you want to get to it the Test email in the “Send Test Email” field, and click on the “Send Test” button.

Short time after you click on the “Send Test” button, you will see the process in the black window and the counter will move up one number, then go to the mail box you sent to it the Test Email to check if the email arrived correct (it can take few seconds and sometimes few minutes to get the email).

If and when you get the Test email and everything correct, you can start to send emails from the list or the lists you load, all of that by clicking on the “Send Emails” button, then you will see in few seconds the program load emails to the “Current Sending To:” and then you will see all the process between the program and our system in the black window under the name “Process Output:” session after session.

Every session you will see the number in the counter under the “Stop” button” jump up by the number of emails the program already sent out, and in the bottom of the program you will see the on the right side, the number of seconds it took the program to send every session (every new session starts from “zero” number).

Beside the seconds counter at the right bottom of the program you see a clock with the local time. The clock moves to the new local time every time the program finish to send a session (it is only clock and it doesn’t show you the time it takes to the program to send your list or lists).

“Stop” button – Just after you click on the “Send Emails” button, the “Stop” button starts to be active (it become from gray to black).

You can and may to click on the “Stop” button any time and the program will stop to send emails but sometimes it can take few seconds until it stops, and the program can stop just after it finish to send the last session before you click on the “Stop” button.

When the program stops to send emails, you will get also notice about it in some Popup window with the words “Process Stopped”.

As you can see, the “Send Emails” button become to be as “Pause” button after you click on the “Send Emails” button.

When you click on the “Stop” button, the program stops any activity, the “Pause” button become again to be as “Send Emails” button, but you can and may to click again on the “Send Emails” and the program will start again to send emails, but it will send emails ONLY to new addresses and will skip the addresses it already sent them emails.

When you click on the “Pause” button, the program doesn’t stop all the activity and it is actually in some kind of “freezing” mode, and the “Pause” button become to be again as “Send Emails” button.

If you want to keep sending emails, you can click again on the “Send Emails” button and the program will start to send emails from the point you paused it.

If and when you want to send again “Test” email or emails when the program sends out emails from the list or the lists you load and we suggest you to do it from time to time to check if the emails you send are not filtered, you have to click on the “Stop” button and NOT on the “Pause” button, then the program will stop and you can send “Test” email or emails by clicking on the “Send Test” button.

 

 

We remind you again – You MUST load the list or the lists you want to send them emails, from the program folder and its mean – you have to copy and paste your list into the program folder.

We also suggset you to create “Shortcut” from the program folder to your “Desktop”, to make it easy to enter to the program folder to paste to it lists, to delete the log file or files the program creates etc.

--------------------------------------------------

 

©1999-2014 Nettrafic Inc.